TIME Ground Stabilizing Pumping Units
TIME’s Ground Stabilizing Pumping Units are designed to be used with specialized product to stabilize drill holes. The pumping unit allows for a constant flow of product into the water line and can be regulated for ground conditions. TIME recommends FracEase for use with the pumping units.
Tank Pump
Product Number: 420-275, 420-51A
Steel or aluminum, the tank pump is designed to be permanently mounted on a drill. The pumping unit is comprised of a 20 litre steel or aluminum tank to which a pump is attached which injects product using a regulator and needle valve. A hydraulic hose is attached to the needle valve which is mounted on the rock drill line on the drill. A solenoid switch may be attached to the drill to regulate the flow of product. A 3/8″ red air hose with quick connect couplings is connected to the drill to provide air for the pump.
Tank Pump with Haskel Pump
Product Number: 420-51AB
The Haskel pump is used where high psi output is required. The air drive of the pump requires a minimum pressure of 25 psi (1.72 bar) to actuate the air cycling valve spool. However, 40 psi is the recommended minimum for long term reliable operation. Maximum air drive pressure is 125 psi (8.6 bar).
Pump output is 8800 psi.
Pail Pump
Product Number: 420-1061
The pail pump is designed for more portable use than the tank pump. It can be mounted on a drill with a mounting bracket.
| Product # | Description | Add to RFQ |
|---|---|---|
| 420-27S | Tank Pump – steel tank | |
| 420-51A | Tank Pump – aluminum tank | |
| 420-51AB | Tank Pump w Haskel pump – alum. | |
| 420-1061 | Pail Pump | |
| 420-98 | Mounting Bracket for Pail Pump |