Nomad NTG80 3” Pump

Aluminum Diaphragm Pump

  • Air Inlet: 19 mm (3/4”)
  • Inlet: 76 mm (3”)
  • Outlet: 76 mm (3”)
  • Suction Lift: 5.5 m Dry (18’) / 9.45 m Wet (31’)
  • Max. Flow Rate: 878 lpm (232 gpm)
  • Max. Size Solids: 10 mm (3/8”)
  • Height: 810 mm (31.9”)
  • Width: 432 mm (17.0”)
  • Depth: 279 mm (11”)

H2O flow rates listed

Caution: Do not exceed 8.6 bar (125 psig) air supply pressure.

PTFE Diaphragms: reduce flow by 25%

PRODUCT LISTING:

ITEM # PART # QTY DESCRIPTION
NTG80 3” ALUMINUM DIAPHRAGM PUMP ASSEMBLIES
80-2693 INCLUDES NEOPRENE DIAPHRAGM, VALVE BALL AND VALVE SEAT
80-2696 INCLUDES BUNA DIAPHRAGM, VALVE BALL AND VALVE SEAT
80-2697 INCLUDES NORDEL DIAPHRAGM, VALVE BALL AND VALVE SEAT
80-26964 INCLUDES HYTREL DIAPHRAGM, VALVE BALL AND VALVE SEAT
80-2698 INCLUDES VITON DIAPHRAGM, VALVE BALL AND VALVE SEAT
80-2699 INCLUDES SANTOPRENE DIAPHRAGM, VALVE BALL AND VALVE SEAT
80-2691 INCLUDES PTFE DIAPHRAGM, VALVE BALL AND VALVE SEAT
1 N15-2012-07 1 AIR VALVE ASM GOLD
2 N08-2500-07 1 AIR VALVE SCREEN
3 N15-2300-23 1 AIR VALVE END CAP W/ GUIDE (TOP)
4 N15-2330-23 1 AIR VALVE END CAP W/OUT GUIDE (BOTTOM)
5 N15-2650-03 2 AIR VALVE SNAP RING
6 N15-2390-52 2 AIR VALVE CAP O-RING
7 N15-2600-52 1 AIR VALVE GASKET
8 N08-6000-08 4 AIR VALVE SCREW 5/16” - 18 X 2-1/4”
9 N15310001225 1 CENTER BLOCK
10 N15321077225 7 CENTER BLOCK TRACKER™ SEAL
11 N15-3520-52 2 BLOCK GASKET
12 N1538000307 1 SHAFT
13 N15-3650-01 2 AIR CHAMBER
14 N15-6200-08 4 AIR CHAMBER SCREW 3/8” - 16 X 4”
15 N15-6550-08 4 AIR CHAMBER CONE NUT 3/8” - 16
16 N15-5000-01 2 LIQUID CHAMBER
17 N15-5021-01 1 DISCHARGE MANIFOLD
18 N15-5080-01 1 INLET MANIFOLD
19 N15-7300-08 2 LARGE CLAMP BAND ASM
20 N15-6120-08 4 LARGE CARRIAGE BOLT 1/2” - 13 X 3 1/2”
21 N15-6420-08 4 LARGE HEX NUT 1/2” -13
22 N15-7100-08 4 SMALL CLAMP BAND ASM
23 N15-6050-08 8 SMALL CARRIAGE BOLT 3/8” - 16 X 2”
24 N15-6450-08 8 SMALL HEX NUT 3/8” -16
25 N15-3510-99 1 MUFFLER (NOT SHOWN)
26 N15-1450-51 1 CHECK BALL (NOT SHOWN)
27 N15-3550-01 1 CHECK BODY (NOT SHOWN)
28 N15-7420-08 1 PIPE NIPPLE (NOT SHOWN)
29 N15-4550-01 2 OUTER PISTON
N15-4600-03 2
30 N15-3700-01 2 INNER PISTON
N15-3750-01 2
31 N15-6850-08 2 INNER PISTON BACK-UP WASHER
32 N15-6130-08 12 PISTON ASM BOLT 2 3/8” - 16 X 1 1/2”
33 N15-6720-08 12 WASHER, FLAT (NOT SHOWN)
34 N15-1010-51 2 DIAPHRAGM NEOPRENE
N15-1010-52 2 DIAPHRAGM BUNA
N15-1010-53 2 DIAPHRAGM VITON
N15-1010-54 2 DIAPHRAGM NORDEL
N15-1010-55 2 DIAPHRAGM PTFE
N15-1010-56 2 DIAPHRAGM HYTREL
N15-1010-58 2 DIAPHRAGM SANTOPRENE
35 N15-1080-51 4 VALVE BALL NEOPRENE
N15-1080-52 4 VALVE BALL BUNA
N15-1080-53 4 VALVE BALL VITON
N15-1080-54 4 VALVE BALL NORDEL
N15-1080-55 4 VALVE BALL PTFE
N15-1080-56 4 VALVE BALL HYTREL
N15-1080-58 4 VALVE BALL SANTOPRENE ®
36 N15-1120-51 4 VALVE SEAT NEOPRENE
N15-1120-52 4 VALVE SEAT BUNA
N15-1120-53 4 VALVE SEAT VITON ®
N15-1120-54 4 VALVE SEAT NORDEL ®
36 N15-1120-55 4 VALVE SEAT PTFE
N15-1120-56 4 VALVE SEAT HYTREL ®
N15-1120-58 4 VALVE SEAT SANTOPRENE
37 N15-1060-52 2 BACK-UP DIAPHRAGM
38 N15-1200-55 4 PTFE VALVE SEAT O-RING
39 N0867200770 8 WASHER, FLAT (NOT SHOWN)
WordPress Table